|
OUR NEW SITE IS IN
"C" CHECK
PLEASE BE PATIENT
PLEASE VISIT OUR FREE AVIATION
CLASSIFIEDS BOARD
FREE FROM AEROLAB AVIATION
|
|
Your source for repairs and overhauls on the KCS-55A, KFC-200, KCS-305
KFC200 O/H & ALIGNMENT / You
can now save time & money by sending us your KC-295 Flight
Computer & KC-290 Mode Controller when you have your KI-256
Overhauled in our Inst. Shop. We align them together on the
bench after your KI-256 is Overhauled, you have them installed
and then fly!! All gyro overhauls with carry a 1-Year Warranty.
|
|
We specialize in the overhaul and repair of the KI-256
Flight Director Indicator, KI-525A Horizon Situation Indicator (HSI)
and the KG-102A Directional Gyro.
|
|
KI-256 FLIGHT COMMAND INDICATOR
-
3 inch flight command
indicator that was originally supplied by Bendix/King now Honeywell
as a component of the KFC-200 KFC-250 KFC-275 and KFC-150 Flight
Control Systems. The KI256 may also be integrated into other
manufacturers AP / FCS systems.
-
Contains a vacuum driven
attitude gyro and presents a display of aircraft pitch and roll
attitudes
-
Hidden single cue command
pointers pop into view to create a highly intuitive command
information presentation from the computer flight director.
-
Contains pitch and roll
pickoffs which provide industry standard AC attitude signals to a KC-295, KCP-299, or other flight computer.
-
Provides a Decision
Height lamp to display the signal sent from a radar altimeter
-
Available with zero
degree or 8-degree panel tilt
|
|
|
KI-525A
PICTORIAL NAVIGATION INDICATOR
-
Pictorial Navigation
Indication component of the KCS-55A compass system which also
includes the KG-102A Directional Gyro, KMT-112 Magnetic Azimuth
Transmitter, and KA-51B Slaving Accessory
-
Intelligent slaved gyro
compass heading system operates in unslaved (manual) mode or in
normal slaved mode where the gyro is automatically fast aligned to
the flux detector heading at start up and continues in normal slaved
mode afterwards.
-
Optional bootstrap (XYZ
synchro) of ships heading is available to provide heading
information to RMI, Stormscopes, Radar, and other appliances. See
part number dash variants shown below for details. This synchro can
be added to existing units which are not already so equipped.
-
Presents a display of the
horizontal navigation situation including the manual selection of
OBS for VOR, GPS and other area navigation appliances.
-
Provides OBS resolver (30
Hz or 400 Hz sine/cosine)
for VOR, GPS and other area navigation appliances. See part number
dash variants shown below for details.
-
Provides flight course
signals (DC course datum) for autopilot system tracking with the
King / Bendix autopilots. Optional interface boxes are available to
convert King / Bendix DC course datum to other manufacturers
autopilot course datum signals.
-
Includes glideslope
pointers which pop into view when the glideslope signal is unflagged
during an ILS approach.
-
Can be operated at 14 or
28VDC
-
Internally lighted
Part Number
|
Dash Number
Variation Descriptions
|
066-3046-00
|
Basic model, without bootstrap heading
synchro, 30 Hz, black bezel
|
066-3046-01
|
With bootstrap heading synchro, 30 Hz
operation, black bezel
|
066-3046-02
|
Without bootstrap heading synchro, 30 or
400 Hz, black bezel
|
066-3046-03
|
With bootstrap heading synchro, 30 or 400
Hz, black bezel
|
066-3046-04
|
Without bootstrap, 30 Hz, glideslope
damping, black bezel
|
066-3046-05
|
With bootstrap, 30 Hz, glideslope damping,
black bezel
|
066-3046-07
|
With bootstrap, 30 or 400 Hz, glideslope
damping, black bezel
|
066-3046-08
|
With bootstrap, 30 Hz, gs damping, 5 volt
lighting, black bezel
|
066-3046-09
|
W/o bootstrap, 30 Hz, 28 volt lighting,
black, night vision goggle capability
|
066-3046-10
|
With bootstrap, 30 Hz, 5 volt lighting,
gray bezel
|
066-3046-11
|
With bootstrap, 30 or 400 Hz, gs damping, 5
volt lighting, gray bezel
|
066-3046-12
|
With bootstrap, 30 or 400 Hz, gs damping, 5
volt lighting, black bezel
|
066-3046-13
|
With bootstrap, 30 or 400 Hz, gs damping,
28 volt NVG lighting, black bezel
|
KG-102A
|
-
Remote mounted
directional gyro system with built in AC power convertor, compass
slaving logic and stepper motor outputs designed to drive the
KI-525A indicator in KCS-55A compass system. May also be used to
drive a Sandel EFIS display.
-
The integral signal
processing electronics receives magnetic azimuth information from
the KMT-112 Magnetic Azimuth Transmitter to provide a
gyro-stabilized magnetic heading to KI-525A Pictorial Navigation
Indicator.
-
Contains internal power
supply which provides excitation voltages for KMT-112 and positive
and negative DC voltages for KI-525A and KA-51B
Part Number
|
Dash Number
Variation Descriptions
|
060-0015-00
|
see details above
|
DESIGNED BY
CREATIVE DESIGNS
www.chapswebsites.com
EMAIL US
FOR INFORMATION |
|